Skip to Main Content »

Search Site
My Cart (0)

Welcome to Arbor Scientific!

Neulog Soil Moisture Sensor NUL-229

Product # NL-2290

Availability: Out of stock

Contact customer service at 1-800-367-6695 for more information.


Neulog Soil Moisture Sensor NUL-229

Double click on above image to view full picture

Zoom Out
Zoom In
This logger sensor is based on measuring the vacuum pressure in a tensiometer. A tensiometer is a closed tube with a special ceramic part in its end. The tensiometer is filled with water and put in the soil. If the soil is dry, water goes out by diffusion through the ceramic holes and vacuum pressure is created in the tensiometer. When we wet the soil, the vacuum in the tensiometer pulls water into the tensiometer and the vacuum decreases. This is why soil moisture is measured in pressure level.

Experiment Duration: 1 second to 31 days.
Range and operation modes:
-20-50 cBar
-20-50 kPa
ADC resolution: 15 bit
0.01 cBar
0.01 kPa
Max Sample Rate (S/sec): 100

A connection between your sensors and hardware is required. You can choose from the USB Module, Wifi Module, RF Module, or Display Module. A Battery Module is also required for any connection other then USB Module, which is powered through the cable.
Products being sold are not toys. They are for Educational / Laboratory use only. They are not for use by children 12 and under.
Has Video