Neulog Blood Pressure Sensor NUL-222
This sensor measures the air pressure in the pressure cuff wrapped around the tested person's arm.
The sensor measures the air pressure in the pressure cuff wrapped around the tested person's arm. Heartbeats affect the blood pressure. That is the reason for the difference between the systolic and diastolic pressure of the tested person.
The sensor has three ranges:
1. The average pressure in the pressure cuff in mm/Hg.
2. The pressure beats with no units.
3. The sum of the two above signals.
The NeuLog software extracts the following from the blood pressure graph:
a) The Systolic blood pressure
b) The Diastolic blood pressure
c) The MAP (Mean Arterial Pressure)
d) The heart beat rate
Experiment Duration: 1 second to 31 days.
Range and operation modes with Resolution:
0-250 mm/Hg - 0.24
0-250 Arb 0.1
0-250 mm/Hg + Arb - 0.24
ADC resolution: 13 bit
Max Sample Rate (S/sec): 100
A connection between your sensors and hardware is required. You can choose from the USB Module, Wifi Module, RF Module, or Display Module. A Battery Module is also required for any connection other then USB Module, which is powered through the cable.
Products being sold are not toys. They are for Educational / Laboratory use only. They are not for use by children 12 and under.