Neulog Colorimeter Sensor NUL-219
The colorimeter measures the levels of color components (red, green and blue) of a solution.
The colorimeter measures the levels of color components (red, green and blue) of a solution. Another option is to measure the solution absorbance of each color component. The colorimeter logger sensor has an opening for a special square solution cuvette. The colorimeter turns on 3 different lights (RGB) in known values and measures the received light that passes through the solution. This sensor has two modes of operation: Absorption and Transparency.
Experiment Duration: 50 milliseconds to 31 days.
Range and operation modes: R.G.B. 0-4 absorbance
ADC resolution: 10 bit
Resolution: 0.01% 0.01 abs
Max Sample Rate (S/sec): 100
Note: The cuvette must be put in a certain way inside the colorimeter. The cuvette has two rough sides. These sides should not be in the line of the light. Three cuvettes are supplied with the sensor.
A connection between your sensors and hardware is required. You can choose from the USB Module, Wifi Module, RF Module, or Display Module. A Battery Module is also required for any connection other then USB Module, which is powered through the cable.
Products being sold are not toys. They are for Educational / Laboratory use only. They are not for use by children 12 and under.
Colorimeter - Neulog logger sensor