The colorimeter measures the levels of color components (red, green and blue) of a solution. Another option is to measure the solution absorbance of each color component. The colorimeter logger sensor has an opening for a special square solution cuvette. The colorimeter turns on 3 different lights (RGB) in known values and measures the received light that passes through the solution. This sensor has two modes of operation: Absorption and Transparency.

Specifications:
Experiment Duration: 50 milliseconds to 31 days.
Range and operation modes: R.G.B. 0-4 absorbance
ADC resolution: 10 bit
Resolution: 0.01% 0.01 abs
Max Sample Rate (S/sec): 100

Note: The cuvette must be put in a certain way inside the colorimeter. The cuvette has two rough sides. These sides should not be in the line of the light. Three cuvettes are supplied with the sensor.

Please note: A connection between your sensors and hardware is required. You can choose from the USB Module, WiFi Module, RF Module, or Display Module. A Battery Module is also required for any connection other then USB Module, which is powered through the cable. View the  Neulog Connection Interface Group  for accessories.